Edimax WAP1750 User Manual - Page 10
Quick Setup - default ip
View all Edimax WAP1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
II. Quick Setup II-1. Initial Setup 1. Connect the access point to a computer via Ethernet cable. 2. Connect the power adapter to the access point's 12V DC port and plug the power adapter into a power supply using the included cable. 3. Please wait a moment for the access point to start up. The access point is ready when the LED is blue. 4. Set your computer's IP address to 192.168.2.x where x is a number in the range 3 - 100. If you are unsure how to do this, please refer to V-1. Configuring your IP address for more information. Please ensure there are no other active network connections on your computer (disconnect Wi-Fi connections and Ethernet cables). 5. Enter the access point's default IP address 192.168.2.2 into the URL bar of a web browser. 6. You will be prompted for a username and password. Enter the default username "admin" and the default password "1234". 7