Edimax WAP1750 User Manual - Page 19

Browser Based Configuration Interface - vlan

Get Edimax WAP1750 PDF manuals and user guides View all Edimax WAP1750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

IV. Browser Based Configuration Interface The browser-based configuration interface enables you to configure the access point's advanced features. The WAP1750 features a range of advanced functions such as MAC filtering, MAC RADIUS authentication, VLAN configurations, up to 32 SSIDs and many more. To access the browser based configuration interface: 1. Connect a computer to your access point using an Ethernet cable. 2. Enter your access point's IP address in the URL bar of a web browser. The access point's default IP address is 192.168.2.2. 3. You will be prompted for a username and password. The default username is "admin" and the default password is "1234", though it was recommended that you change the password during setup (see II-2. Basic Settings). If you cannot remember your password, reset the access point back to its factory default settings. Refer to I-5. Reset 4. You will arrive at the "System Information" screen shown below. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
16
IV.
Browser Based Configuration Interface
The browser-based configuration interface enables you to configure the
access point’s
advanced features. The WAP1750 features a range of advanced
functions such as MAC filtering, MAC RADIUS authentication, VLAN
configurations, up to 32 SSIDs and many more. To access the browser based
configuration interface:
1.
Connect a computer to your access point using an Ethernet cable.
2.
Enter your
access point’s
IP address in the URL bar of a web browser. The
access point’s default IP address is
192.168.2.2.
3.
You will be prompted for a username and password. The default
username is “admin” and the default password is “
1234
”, though it was
recommended that you change the password during setup (see
II-2. Basic
Settings
).
If you cannot remember your password, reset the access point
back to its factory default settings. Refer to
I-5. Reset
4.
You will arrive at the “System
Information
” screen shown below.