Electrolux E15IM60GSS Complete Owner's Guide (English) - Page 11

Door Reversal 11 4 Remove the two door closer inserts from the 7 Holding door upright with top of door tilted existing bottom hinge and install as shown on forward, place hole of door pivot plate on the new bottom hinge (see Figure 17). bottom hinge screw pin (see Figure 19). Be sure that the bosses on the closers align with holes in hinge and hinge plate. Figure 17 Figure 19 DOOR CLOSER INSERTS BOSS UL312 5 Remove existing bottom hinge (3 screws) and remount on opposite side TOP. Remove hinge screw pin. 6 With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (see Figure 18). BOSS CLRCO008 8 Tilt top of door into position in top hinge and install top hinge screw pin. 9 In empty hinge holes, install plastic screw plugs (3 top and 3 bottom) and door hole plug (1,door top) removed in step 2. Figure 18 UL319