Electrolux E24CM75GSS Use and Care Manual - Page 33
Warning, Important
View all Electrolux E24CM75GSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Care & Cleaning 33 6. Remove and empty the used coffee grounds bin. IMportant The power switch must be on while dumping out the used coffee grounds bin for the "Drawer Full" message to clear from the display. Remove Used Coffee Grounds Bin 7. Use the provided cleaning brush to remove any residual coffee grounds from the piston assembly and the inside of the brewing unit. Warning • The piston assembly is hot! • To prevent damage to the front panel, make sure the drip tray is removed before closing it. Clean Piston Assembly WARNING: HOT 8. Replace the used coffee grounds bin. 9. Make sure the drip tray is removed. Close the front panel door and lock it. Remove the key. 10. Push the unit back into the cabinet and replace the drip tray. 11. Flush the system out according to the instructions on page 39. The "Clean Group" message should disappear after the flush is done.