Electrolux E24WC48EBS Service Manual - Page 2

Safe Servicing Practices - All Appliances - manual

Page 2 highlights

SAFE SERVICING PRACTICES - ALL APPLIANCES To avoid personal injury and/or property damage, it is important that Safe Servicing Practices be observed. The following are some limited examples of safe practices: 1. DO NOT attempt a product repair if you have any doubts as to your ability to complete it in a safe and satisfactory manner. 2. Before servicing or moving an appliance: • Remove the power cord from the electrical outlet, trip the circuit breaker to the OFF position, or remove the fuse. • Turn off the gas supply and allow any residual gas to dissipate for 10 to 20 minutes. 3. Never interfere with the proper operation of any safety device. 4. USE ONLY REPLACEMENT PARTS CATALOGED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT COMPLIANCE WITH SAFETY STANDARDS SET FOR HOME APPLIANCES. 5. GROUNDING: The standard color coding for safety ground wires is GREEN, or GREEN with YELLOW STRIPES. Ground leads are not to be used as current carrying conductors. It is EXTREMELY important that the service technician reestablish all safety grounds prior to completion of service. Failure to do so will create a hazard. 6. Prior to returning the product to service, ensure that: • All electrical connections are correct and secure • All electrical leads are properly dressed and secured away from sharp edges, high-temperature components, and moving parts • All non-insulated electrical terminals, connectors, heaters, etc. are adequately spaced away from all metal parts and panels • All safety grounds (both internal and external) are correctly and securely connected • All panels are properly and securely reassembled ATTENTION!!! This service manual is intended for use by persons having electrical and mechanical training and a level of knowledge of these subjects generally considered acceptable in the appliance repair trade. Electrolux Major Appliances cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of this manual. © 2005 Electrolux Major Appliances 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

2
ATTENTION!!!
This service manual is intended for use by persons having electrical and mechanical
training and a level of knowledge of these subjects generally considered acceptable in the
appliance repair trade. Electrolux Major Appliances cannot be responsible, nor assume
any liability, for injury or damage of any kind arising from the use of this manual.
©
2005 Electrolux Major Appliances
SAFE SERVICING PRACTICES - ALL APPLIANCES
To avoid
personal injury and/or property damage, it is important that
Safe
Servicing Practices
be observed.
The following are some limited examples of
safe
practices:
1.
DO NOT
attempt a product repair if you have any doubts as to your ability to
complete it in a safe and satisfactory manner.
2.
Before servicing or moving an appliance:
Remove the power cord from the electrical outlet, trip the circuit breaker to
the OFF position, or remove the fuse.
Turn off the gas supply and allow any residual gas to dissipate for 10 to 20
minutes.
3.
Never interfere with the proper operation of any safety device.
4.
USE ONLY REPLACEMENT PARTS CATALOGED FOR THIS APPLIANCE.
SUBSTITUTIONS MAY DEFEAT COMPLIANCE WITH SAFETY
STANDARDS SET FOR HOME APPLIANCES.
5.
GROUNDING
:
The standard color coding for safety ground wires is
GREEN
,
or
GREEN
with
YELLOW STRIPES
. Ground leads are not to be used as current
carrying conductors. It is
EXTREMELY
important that the service technician
reestablish all safety grounds prior
to completion of service.
Failure to do so
will create a hazard.
6.
Prior to returning the product to service, ensure that:
All electrical connections are correct and secure
All electrical leads are properly dressed and secured away from sharp
edges, high-temperature components, and moving parts
All non-insulated electrical terminals, connectors, heaters, etc. are
adequately spaced away from all metal parts and panels
All safety grounds (both internal and external) are correctly and securely
connected
All panels are properly and securely reassembled