Electrolux E24WC75HSS Owners Guide - Page 11
ICON Designer, ICON Pro
 |
UPC - 012505746352
View all Electrolux E24WC75HSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Door Reversal 11 14 Remove button plug from upper left side of door and place in upper right side of door. Place door on lower LH hinge bracket. Remove Button Plug From Left Side And Install On Right Side 15 Install upper LH hinge bracket by installing four (4) screws. If door does not close properly after reversing, the following actions may be taken: a) Loosen lower hinge screws and align door. Retighten screws. b) Loosen upper hinge screws and align door. Retighten screws. c) Remove door gasket, turn 180°, and reinstall. ICON Designer Remove Button Plug From Left Side And Install On Right Side ICON Pro 16 Route door harness behind lower front panel. Reconnect door harness to bracket.
-
1 -
2
-
3
-
4
-
5
-
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17
-
18
-
19
 |
 |
11
14
Remove button plug from upper left side of
door and place in upper right side of door.
Place door on lower LH hinge bracket.
Door Reversal
15
Install upper LH hinge bracket by installing
four (4) screws.
If door does not close properly after
reversing, the following actions may be taken:
a)
Loosen lower hinge screws and align
door.
Retighten screws.
b)
Loosen upper hinge screws and align
door.
Retighten screws.
c)
Remove door gasket, turn 180°, and
reinstall.
16
Route door harness behind lower front panel.
Reconnect door harness to bracket.
Remove Button Plug
From Left Side And
Install On Right Side
ICON Designer
Remove Button Plug
From Left Side And
Install On Right Side
ICON Pro