Electrolux E24WC75HSS Owners Guide - Page 9

Door Reversal

Page 9 highlights

Door Reversal 9 Reversing the Door This model comes equipped with a RH-swing door. To convert the unit to a LH-swing door (as shown in the Use & Care Guide), certain components must be obtained before beginning the conversion. These components are available from your local dealer or by calling Electrolux. Order Part Number: 5303918377 To reverse the door: 1 Disconnect power to the wine cooler. 2 Remove toe grille by removing two (2) screws. 4 Remove upper right-hand (RH) hinge bracket by loosening four (4) screws. Be careful to support the door while loosening and removing the upper hinge bracket. 5 Lift the door off of the lower RH hinge bracket. Turn the door upside down and place on a soft, non-abrasive surface. 3 Disconnect door harness from connector bracket behind lower front panel. Pull harness from behind lower front panel so it is hanging below the door.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

9
Door Reversal
Reversing the Door
This model comes equipped with a RH-swing door.
To convert the unit to a LH-swing door (as shown
in the Use & Care Guide), certain components
must be obtained before beginning the conversion.
These components are available from your local
dealer or by calling Electrolux.
Order Part Number:
5303918377
To reverse the door:
1
Disconnect power to the wine cooler.
2
Remove toe grille by removing two (2)
screws.
3
Disconnect door harness from connector
bracket behind lower front panel.
Pull
harness from behind lower front panel so it is
hanging below the door.
4
Remove upper right-hand (RH) hinge bracket
by loosening four (4) screws.
Be careful
to support the door while loosening and
removing the upper hinge bracket.
5
Lift the door off of the lower RH hinge
bracket.
Turn the door upside down and
place on a soft, non-abrasive surface.