Electrolux E30IC80ISS Owners Guide - Page 15

Setting Surface Controls 15 operating the cooking zones (cont'd) IMPORTANT OPERATING NOTES: • Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to display an error code and turn OFF while cooking. Clean the spills or remove the objects from the cooktop. • Be sure the cooktop vent openings are NOT blocked. If the vent openings are blocked, the cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance. • If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect the situation and the cookware will no longer heat. The affected Cooking Zone Alpha-Numeric display will flash the power level set for the Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes before the Cooking Zone will automatically shut OFF. To Turn OFF the Cooking Zones: 1. Once cooking is complete, touch the key pad to turn the Cooking Zone OFF. 2. The corresponding Cooking Zone ON/OFF Indicator light located above the key pad will turn OFF. A beep will sound and the chosen Cooking Zone power level display will turn off. If no other Cooking Zones are active and no other key pads are touched the entire cooktop will shut OFF automatically in 10 more seconds. 3. When any Cooking Zone is OFF, the corresponding Cooking Zone Alpha-Numeric display may display HE if the Cooking Zone temperature is too HOT. The Alpha-Numeric display will continue to display HE even if the Cooktop is switched OFF. The Alpha-Numeric display will continue to display HE as long as the cooktop remains HOT. ! Caution The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT form residual heat transferred from the cookware and burns may occur.