Electrolux E30WD75GSS Owners Guide - Page 9

General Care & Cleaning

Page 9 highlights

General Care & Cleaning 9 TO REMOVE AND REPLACE WARMER DRAWER ! WARNING Turn the warmer drawer to OFF before removing the drawer. DO NOT touch the warmer drawer element. The element may still be hot enough to cause burns, even if it is dark in color. To Remove Warmer Drawer: 1. Turn power off before removing the warmer drawer. 2. Open the drawer to the fully opened position. 3. Locate glide lever on each side of drawer, pull up on the right glide lever and push down on the left glide lever (See Figure 1). 4. Pull the drawer away from the range. To Replace Warmer (Warm & Ready™) Drawer: 1. Pull the plastic slider to the front of the glide slots on each side of the drawer cavity (See Figure 2). 2. Align the glide on each side of the drawer with the drawer cavity glide slot. 3. Push the drawer into the drawer cavity until glide levers "click" (approximately 2"). If you do not hear the glide levers "click" or the drawer does not feel seated remove the drawer and repeat steps 1 thru 3. Left glide Lever Pull down lever with finger Pull up lever with finger Lever Figure 1 Right glide ! WARNING Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer drawer. Figure 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

9
General Care & Cleaning
TO REMOVE AND REPLACE WARMER DRAWER
!
WARNING
WARNING
WARNING
WARNING
WARNING
Turn the warmer drawer to OFF before removing the drawer.
DO NOT
touch
the warmer drawer element. The element may still be hot enough to cause
burns, even if it is dark in color.
!
WARNING
WARNING
WARNING
WARNING
WARNING
Electrical Shock Hazard
can occur and result in
serious injury or death. Disconnect appliance
from electric power before cleaning and
servicing the warmer drawer.
To Remove Warmer Drawer:
1.
Turn power off before removing the warmer drawer.
2.
Open the drawer to the fully opened position.
3.
Locate glide lever on each side of drawer, pull up on the
right glide lever and push down on the left glide lever (See
Figure 1).
4.
Pull the drawer away from the range.
To Replace Warmer (Warm & Ready™) Drawer:
1.
Pull the plastic slider to the front
of the glide slots on
each side of the drawer cavity (See Figure 2).
2.
Align the glide on each side of the drawer with the drawer
cavity glide slot.
3.
Push the drawer into the drawer cavity until glide levers
“click” (approximately 2”).
If you do not hear the glide
levers “click” or the drawer does not feel seated
remove the drawer and repeat steps 1 thru 3.
Figure 2
Figure 1
Lever
Lever
Left glide
Right glide
Pull up lever
with finger
Pull down lever
with finger