Electrolux E36GC70FSS Owners Guide - Page 13
Cleaning The Burner Grates, Burner Caps And, Burner Heads
UPC - 057112094519
View all Electrolux E36GC70FSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
General Care & Cleaning 13 CLEANING THE BURNER GRATES, BURNER CAPS AND BURNER HEADS The Burner Grates, Burner Caps and Burner Heads should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions: To Remove and Replace the Surface Burner Grate, Surface Burner Cap and Surface Burner Head - Remove in the following order; (1st) Surface Burner Grate, (2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1). Surface Burner Grate Reverse the procedure above to replace the Surface Burner Cap, Surface Burner Head and Surface Burner Grate. Do not remove any burner parts from the cooktop until the 1st burner parts have completely cooled and are safe to handle. Do not operate the surface burners without the Surface Burner Caps, Surface Burner Heads and Surface Burner Grates properly in place. To Clean the Burner Caps, Burner Heads and Burner Grates - Use a soap-filled scouring pad or a mild abrasive cleaner to clean the surface burner caps and surface burner Orifice heads. The Grates are designed to be Dishwasher safe for cleaning. The ports (or slots) around the burner heads must be routinely cleaned. If residue still remains in these ports, use a small-gauge wire or needle to clean the slots or holes being careful not to damage the electrode. For proper flow of gas and ignition of the burner-DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS make sure that the surface burner cap, the surface burner head and the surface burner grate are properly in place whenever a surface burner is in use. Surface 2nd Burner Cap Surface Burner 3rd Head Electrode Figure 1 Surface Burner Grate Surface Burner Caps Surface Burner Heads THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop. CAUTION - Use caution when replacing the burner head so the electrode is not damaged. A damaged electrode may cause a delayed ignition or prevent the burner from igniting - Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be made by a qualified service technician.