Electrolux E36GC70FSS Owners Guide - Page 9

Surface Cooking 9 MED MED MED MED LOCATIONS OF THE BURNERS The 30" cooktop is equipped with different sized burners. The surface burners are located on the cooktop as follows (See Figure): - a 5 000 BTU (natural gas) burner located at the right rear position; - a 9 500 BTU (natural gas) burner located at the left rear position; - a 16 000 BTU (natural gas) burner located at the left front position; - and a 17 000 BTU (natural gas) burner located at the right front position. The 36" cooktop is equipped with different sized burners. The surface burners are located on the cooktop as follows (See Figure): - a 5 000 BTU (natural gas) burner located at the right rear position; - two 9 500 BTU (natural gas) burners located at the left and center rear positions; - a 16 000 BTU (natural gas) burner located at the left front position; - and a 17 000 BTU (natural gas) burner located at the right front position. PLACEMENT OF BURNER HEADS AND CAPS OFF OFF LO LO LO IH OFF LO l ite l ite HI l ite HI l ite HI 30" cooktop OFF OFF MED LO l ite HI l ite HI l ite HI OFF OFF MED MED LO LO l ite HI l ite HI OFF OFF MED MED LO LO 36" cooktop Place burner head over each gas orifice, matching the head with the orifice size. Be careful not to damage the electrode while placing the burner head over the orifice. Make sure electrode fits correctly into slot in burner head. Place a burner cap on each burner head, matching the cap size to the head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed BEFORE using your appliance. Make sure each burner cap is properly aligned and level. Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself. Burner Cap Burner Head Electrode Gas Opening