Electrolux EDW7505HSS Complete Owner's Guide (English) - Page 8

8 Operating Instructions Start/Cancel To start a cycle, press the START touchpad once and close the door. To cancel when a cycle is running, open the door and press the CANCEL touchpad once. Close the door again and the dishwasher will drain and shut off. CHIME These models are equipped with a chime to audibly indicate when you have pressed a cycle or selected an option. NOTE Opening the door during normal operation will only pause the selected cycle. Error Indications In certain situations which are critical to the machine function and safe operation, the control shall shut down and indicate an error code "Er" (See Error Codes on page 21). If one of these codes are displayed contact the Electrolux Customer Care Center at 1-877-4353287. They will be able to provide assistance in troubleshooting the problem and/or locating an authorized service technician, if needed. BLUE LIGHT When BLUE LIGHT luminates on the floor this indicates that the wash cycle is complete. STATUS WINDOW The STATUS window displays codes typically seen during programming of the dishwasher. The window will not display anything when the door is closed. The STATUS window indicates the following activity: 1 HR-24HRS Indicates number of delay start hours for selected cycle. Cd Displayed once the program has been entered, the START/ CANCEL touchpad is pressed and after a 10 second delay. It also flashes if the door is opened during a wash cycle, after a 10 second delay. Close the dishwasher door to begin or continue a wash cycle. SA Displayed when SANITIZE option has been selected, dishwasher has reached SANITIZE temperature at completion of wash cycle. SA will remain displayed for 10 seconds. CL Displayed when wash cycle has been completed, SANITIZE has not been selected or SANITIZE temperature has not been reached. CL will remain displayed for 10 seconds.