Electrolux EI15IM55GS Complete Owner's Guide (English) - Page 13

Built-In Installation / Start-Up 13 Installing a Built-In Your Electrolux product has been designed for either free-standing or built-in installation. When built-in, your ice maker does not require additional air space for top, sides or rear. However, the front grille must NOT be obstructed. NOTE To ease unit installation and removal, the unit must be located to allow clearance for water, drain and electrical connections in the rear of the ice maker. Model EI15IM55GS Built-In Cabinet Dimensions Unit Dimensions Width Height 14-15/16" 34-1/8" Depth 24" CAUTION DO NOT install unit behind closed doors. Initial Start-Up Once installation and leveling is complete, the unit is ready for initial start-up and operation. All units are shipped with controls that are preset. No initial adjustments are required. IMPORTANT It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation. Plug into a 115 volt polarized and grounded electrical outlet. Open the water supply valve at the main water source. To turn the unit on or off, touch and hold the POWER button on the display panel for approximately five seconds, then release. • A small LED above the icon will illuminate to confirm the touch of any controller icon. • The electronic display will show "ICE" when the unit is on, and "OFF" when the unit is off. • Turning the unit off will override any other control function. UP POWER ARROW DISPLAY LIGHT, DOWN BLACKOUT MODE ARROW & OTHER FUNCTIONS ICE Figure 24 Blackout Mode (not Star-K certified) 1. Touch and hold the LIGHT button for ten seconds, then release (the °F symbol will flash briefly at the end of the ten second period). 2. The control display will go dark for 36 hours. 3. To exit the Blackout Mode, repeat step 1. Normal Operating Sounds All models incorporate rigid foam insulated cabinets to provide high thermal efficiency and maximum sound reduction for it's internal working components. In spite of this technology, your model may make sounds that are unfamiliar. Normal operating sounds may be more noticeable because of the unit's environment. Hard surfaces such as cabinets, wood/vinyl/tiled floors and paneled walls have a tendency to reflect normal operating noises. Common refrigeration components and a brief description of the normal operating sounds they make are listed below. NOTE: Your unit may not contain all the components listed. • Compressor: The compressor makes a hum or pulsing sound that may be heard when it operates • Evaporator: Refrigerant flowing through an evaporator may sound like boiling liquid. • Condenser Fan: Air moving through a condenser may be heard. • Automatic Ice Maker: You will hear ice as it drops from the mold into the ice bin/tray. • Water Valve: The water valve will make an occasional buzzing sound and running water will be heard.