Electrolux EI16DDPRKS Installation Instructions (English, Spanish, French) - Page 8

8 Installation of Blower Assembly Remove the Blower Cover Remove the Blower Cover from the Main Blower Housing by removing the (16) silver hex head screws from the Blower Cover. Retain the screws. Remove the Wire box from the Main Blower Housing by removing the 3 hex head screws. Retain the screws. Mount Main Housing The housing is designed to mount to joist or studs on 16" centers. When mounting the Main blower Housing, the (4) lag bolts must be attached to joists, studs or other structural members. DO NOT attach the Main Blower Housing directly to wall board, ceiling panels, or other non-structural materials. Refer to the section drawings on the following pages to determine the proper mounting orientation for the Main Blower Housing. DO NOT install the unit so that the unit is supported by the Blower Cover. Damage to the Blower may occur. Blower Cover (16) Silver Hex Head Screws (3) Hex Head Screws Wire Box