Electrolux EI23BC30KB Complete Owner's Guide (English) - Page 10
Removing the Doors
View all Electrolux EI23BC30KB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 Removing the Doors Getting through narrow spaces If your refrigerator will not fit through an entrance area, you can remove the doors. Check first by measuring the entrance. To reinstall the right door, reverse the above steps. Lower Hinge Removal To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Open the freezer drawer and remove the toe grille (see "Installation" section). 3 Remove any food from the door shelves and close the doors. To remove the refrigerator doors: 1 Trace lightly around the door's top hinges with a pencil. This makes reinstallation easier. Once both doors are in place, ensure they are aligned with each other and level (please see the "Installation" section for more details), and replace the top hinge cover. CAUTION Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. Removing Freezer Drawer 1 Open freezer drawer. 2 Remove drawer screws on right and left sides (two (2) screws on each side). Remove Hex Head Drawer Screw Do Not Remove Other Screws Do Not Remove Other Screws Remove Hex Head Drawer Screw 2 Disconnect the harness by grasping both sides of the connector firmly, depress the latch, and pull apart. Remove the two (2) screws from the top hinge. Lift the door off of the bottom hinge and set it aside. Remove Hex Head Drawer Screw CAUTION Remove Hex Head Drawer Screw Drawer is heavy. Use caution when lifting. 3 Lift drawer up and out to remove. 3 Unscrew the three (3) lower hinge screws and hinge if necessary.