Electrolux EI23BC30KS Complete Owner's Guide (English) - Page 14
Controls
View all Electrolux EI23BC30KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 Controls IQ-TouchTM A red indicator light will be illuminated above most active features. Touch the icon to activate the options below. NOTE *Features may vary according to model. fast freeze Activates a faster rate for freezing food. fast ice Increases the production of ice water filter Press and hold for three (3) seconds to reset after filter change. air filter Filter condition status is always displayed when door is open. Press and hold for three (3) seconds to reset after filter change. temp mode Touch to toggle display from Fahrenheit to Celsius. mute sounds Tones emitted by each key press can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. default settings Resets all refrigerator settings such as temp, temp display and tones to their factory default settings. on off Press and hold for three (3) seconds to turn off the cooling system to clean the refrigerator. It also turns off the ice maker. The temperature displays will read OFF. eco friendly Keep this switch set on eco friendly (light on) for lowest energy usage. If moisture appears on the cabinet between the doors, pressing this button will turn the light off and enable an electric heater used to reduce moisture on the cabinet between the doors. *vacation mode Conserves energy by increasing the time between automatic defrost. This feature is automatically activated during long periods between door openings. Vacation mode is manually activated when the red indicator is lit. IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Setting cooling temperatures Press the + or - indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display. Alarms Door Ajar High Temp Power Fail If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the bottom display of the control panel. The alarm is turned off by closing the door. The mute sounds key will blink to prompt the reset of any active alarms. Press this key to reset any system alarms. In the event of a high temperature condition, the temperature display will blink and display "HI". After 20 minutes, the alarm will sound and the high temp indicator will be red on the bottom of the control panel. The mute sounds icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. In case the high temp alarm is not acknowledged at the first alarm sound time out, when the door is first opened, the alarm sound will be repeated. In the event of a power failure, the power fail alert will be displayed and the temperature display will blink until the mute sounds icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. The power fail alert is turned off and the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached.