Electrolux EI23BC37SS Complete Owner s Guide English - Page 8
Caution
View all Electrolux EI23BC37SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Installation To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Flipper Mullion Installing Shelves (select models) Your refrigerator was shipped with the shelf hanger and glass shelves in a shipping pack. Below are the instructions to install and remove the shelves in your desired locations. 1 Place top hooks of the hanger into the desired slot, and lower straight down until lower hooks rest on the ladder. 2 Relock shelf by pushing the slide mechanism away from you. Flipper Mullion Hinge Screw Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Flipper Mullion Mullion Guide 3 While holding shelf at a 45-degree angle with the gray handle facing you, push the shelf into the back of the hanger. Thickness of a Coin Adjusting Flipper Mullion Height 3 Re-tighten screw. CAUTION Shelves must be removed prior to moving the refrigerator.