Electrolux EI23BC51IB Complete Owner's Guide (English) - Page 14

14 Controls press & hold on default off settings refrigerator temp freezer temp temp mode hold to reset good water filter order replace hold to reset good air filter order replace door ajar high temp power fail IQ-TouchTM A red indicator light will be illuminated above most active features. press & hold Touch the icon to activate the options below. fast freeze Activates a faster rate for freezing food. fast ice Increases the production of ice on defau off settin vacation mode Conserves energy by increasing the time between automatic defrost. This featruerferigerator temp is automatically activated during long periods between door openings. Vacation mode is manually activated when the red indicator is lit. water filter Press and hold for three (3) seconds to reset after filter change. air filter Filter condition status is always displayed when door is open. Press and hold for three (3) seconds to reset after filter change. temp mode mute sounds Touch to toggle display from Fahrenheit to Celsius. Tones emitted by each key press can be turned off based on user preference. Thfereezer temp sounds are muted when the red indicator is lit. Warning signals will stay active. default settings on off Resets all refrigerator settings such as temp, temp display and tones to their factory default settings. Press and hold for three (3) seconds to turn off the cooling system to clean the refrigerator. It also turns off the ice maker. The temperature displays will read OFF. IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. temp mode Setting cooling temperatures Press the + or - indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display. Alarms hold to reset good Door Ajar High Temp If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the bottom display of the control pwanaetle. r The alarm is turned off by closing the door. The mute sounds key will blink tofilter order replac prompt the reset of any active alarms. Press this key to reset any system alarms. hold to reset In the event of a high temperature condition, the temperature display will blink and display "HI". After 20 minutes, the alarm will sound and the high temp indicator good will be red on the bottom of the control panel. The mute sounds icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperaaitrure order reached will be displayed and the refrigerator will resume normal operation. fIinlter replac case the high temp alarm is not acknowledged at the first alarm sound time out, when the door is first opened, the alarm sound will be repeated. Power Fail In the event of a power failure, the power fail alert will be displayed and the temperature display will blink until the mute sounds icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. The power fail alert is turned off and the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached. door a high t power aft angles (not shown) 0.5° LED COLORS / Assembly Overlay Part