Electrolux EI23BC65KS Complete Owner's Guide (English) - Page 13
Installing Door Handles
View all Electrolux EI23BC65KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing Door Handles 13 Door Handle Mounting Instructions 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5 Position freezer handle end caps over left and right preinstalled shoulder bolts that are fastened to the drawer, ensuring the holes for the set screws are facing down. 6 While holding handle firmly against drawer, fasten left and right Allen set screws (C) with supplied Allen wrench. Mounting Refrigerator Handles Mounting Freezer Handle NOTE To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened. CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.