Electrolux EI30DD10KS Complete Owner's Guide (English) - Page 15

Use & Care

Page 15 highlights

Use & Care 15 Operating the Telescoping Downdraft System - Raise the downdraft by pressing the raise/lower push button. The telescoping vent will rise up to full height. - The blower can also be turned off by simply pressing the raise/lower push button and lowering the telescoping vent. - The blower can then be turned on by sliding the control knob up. - The blower speed can be adjusted by sliding the control knob between the Hi and Lo positions. - The blower is turned off by sliding the control knob to the OFF position. - Upon raising the telescoping vent again, the blower will automatically turn on at the selected speed. - Always turn the downdraft blower ON before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few minutes to clean the air after you turn the cooktop OFF. NOTE If there is a power interruption with the telescoping vent in the up position, pressing the raise/lower push button will lower the telescoping vent. Normal operation can then resume.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

15
Operating the Telescoping
Downdraft System
- Raise the downdraft by pressing the raise/lower
push button. The telescoping vent will rise up to full
height.
- The blower can then be turned on by sliding the
control knob up.
- The blower speed can be adjusted by sliding the
control knob between the Hi and Lo positions.
- The blower is turned off by sliding the control knob
to the OFF position.
- The blower can also be turned off by simply
pressing the raise/lower push button and lowering
the telescoping vent.
- Upon raising the telescoping vent again, the blower
will automatically turn on at the selected speed.
- Always turn the downdraft blower ON before you
begin cooking to establish an air flow in the kitchen.
Let the blower run for a few minutes to clean the air
after you turn the cooktop OFF.
NOTE
If there is a power interruption with the telescoping
vent in the up position, pressing the
raise/lower
push button
will lower the telescoping vent. Normal
operation can then resume.
Use & Care