Electrolux EIED55HIW Complete Owner's Guide (English) - Page 7
Operating Instructions - model #
UPC - 012505378614
View all Electrolux EIED55HIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Operating Instructions 7 To operate your dryer, follow these basic steps: 1. Check and clean the lint screen. (See page 9.) 2. Load the dryer. (See page 9.) 3. Select the desired cycle. (See page 9, pages 10-12 and page 18.) 4. Select desired settings and options. (See page 9, page 13, page 14 and pages 15-16.) 5. Start the dryer. (See page 9.) Normal Operating Sounds You may or may not hear the following sounds from your new dryer: A. SUSPENSION ROLLERS The dryer drum is supported by a set of suspension rollers. At times there may be a thumping or rolling sound when the dryer starts. This may happen if the dryer has not been in use for a period of time, or after a heavy load has remained in the dryer drum for an extended period, creating a temporary flat spot on the edge of the roller. The noise should dissipate as the dryer A operates and the flat spots smooth out. B. AIR FLOW SYSTEM Your dryer is equipped with a high volume air handling system. In some installations there may be some sounds associated with air movement throughout the dryer, including the air duct, blower, and exhaust system. This is normal and can vary D with load size and type. C. GAS VALVE (Gas models only.) The flow of gas is C controlled by electric solenoids. During operation there may be a clicking sound as the valve opens B and closes to control the gas flow. D. GAS BURNER (Gas models only.) When the burner is operating, there may be sounds generated as the air flow mixes with the gas flame. This noise is normal and will only occur when the gas is ignited in the combustion tube.