Electrolux EL4021A Complete Owner s Guide English - Page 8

USING THE CANISTER VACUUM CLEANER FOR THE FIRST TIME ENGLISH How to assemble 1. Press top lever and lift off dust cup. 2. Check to confirm that washable filter screen (A) and HEPA s-filter (B) are in place. 3. Reposition dust cup; snap into place. 4. At back of canister, grasp filter frame and pull straight out. Make 1 sure washable dust filter is in place. Slide filter frame back and snap into position. 5. Insert hose end (C); press until it clicks into place. (To remove hose, press tabs on each side and pull to release.) 6. Insert hose end (D) into hose handle until it clicks into place. (To remove hose handle, press 4 tabs and pull to release.) 7. Push hose handle into wand until it clicks. (Press tab and pull to release.) 8. To extend wand, push lever up and pull. Click! 9. Press tool caddy to clamp onto upper section of wand; store 3-in-1 tool in caddy. 10. Push desired floor nozzle onto wand until it clicks. 7 A B 2 Click! C 5 9 8 How to operate 1. Pull out power cord and plug in. 2. Turn dial to start. Continue turning dial to adjust desired suction power. 3. Use slide on hose handle to further adjust suction power. 4. To retract cord, press rewind 1 switch. Hold the plug to prevent it from hitting you. 2 8 www.electrolux.com Click! 3 D Click! 6 Click! 10 3 4