Electrolux EL6985B User Guide - Page 12

A B 1 2 4 5a 6 7 9 10 12 13 12 English REPLACING THE S-BAG™ DUST BAG 1 The s-bag™ dust bag must be replaced when the indicator window is completely red. Read indicator with the nozzle lifted. 2 Fold down the carrying handle. Press the catches on the 3 hose, remove the hose and open the cover. 3 Lift out the insert holding the s-bag™. 4 Pull the cardboard to remove the s-bag™ from the insert. This automatically seals the s-bag™ and prevents dust leaking out. 5 a Insert a new s-bag™ by pushing the cardboard right into the end of the groove in the insert. 5 b Attach the insert by placing it on the back pegs in the bag compartment. Then fold down the insert and close the cover. 5b Note: Replace the dust bag when the indicator is red, even if the bag is not full (it could be obstructed). Also replace after vacuuming carpet cleaning powder. Be sure to use only an original Electrolux s-bag™ Classic, s-bag™ Clinic or an s-bag™ Anti-odor dust bag. Replacement of the motor filter should be done with every 5th replacement of the dust bag, 6 Fold down the carrying handle. Press the catches, remove the hose and open the front cover. 7 Lift out the insert holding the s-bag™. 8 Pull the motor filter holder upwards until it comes away from the groove. 9 Carefully pull the old, dirty filter out of the filter holder and replace it with a new motor filter. 10 Reattach the filter holder containing the new motor filter. 8 11 Replace the insert holding the s-bag™ and then close the cover. Replacement of the exhaust filter should be done with every 5th replacement of the dust bag. Note - be sure to unplug the cleaner before changing the dust bag or filter. The filters must always be replaced with new ones and cannot be washed.* 12 Fold up the carrying handle until it clicks into place. 11 13 Place your thumbs on the back edge of the lid and then open the lid by pulling the handle backwards and upwards with your index/middle finger. 14 Lift out the filter. Insert a new filter and replace the lid as shown. On/Off switch International symbol I means On, international symbol O means Off. 14 *A washable filter can be bouught as an option.