Electrolux EL6985B User Guide - Page 14
Note: The warranty does not cover any damage to the hose caused by, cleaning it. - turbo nozzle
View all Electrolux EL6985B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English CLEANING THE HOSE AND NOZZLE The vacuum cleaner stops automatically if the nozzle, tube, hose or filters and s-bag™ becomes blocked. In such cases, disconnect from outlet and allow to cool for 20-30 minutes. Clear blockage and/or replace filters and s-bag™ and restart. 1 2 3 Tubes and hoses 1 Use a rod or similar to clear the tubes and hose. 2 It may also be possible to remove the obstruction in the hose by squeezing it. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note:The warranty does not cover any damage to the hose caused by cleaning it. Cleaning the floor nozzle 3 To avoid deterioration of suction power, frequently clean the carpet/hard floor nozzle. The easiest way to clean it is by using the hose handle. 4 Press each wheel-hub and pull off the wheels. 4 5 6 7 5 Remove dust-balls, hair or other objects that may be entangled. Use the crevice nozzle to clean the wheel axles. Replace the wheels by pressing them onto the axles. 6 Larger objects can be accessed by removing the connection hose (press the small catches located on each side and simultaneously draw the connection tube outwards in an upright position). 7 Remove the object(s) and replace the connection hose. Cleaning the turbo nozzle 8 8 Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. by snipping them away with scissors. Use the hose handle to clean the nozzle. 14