Electrolux EW23BC85KS Complete Owner's Guide (English) - Page 10
Caution
View all Electrolux EW23BC85KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 Installation Installing Shelves Your refrigerator was shipped with the shelf hanger and shelf locking clip installed in their shipping position. Below are the instructions to install the shelves in your desired locations. 1 Remove shelf from its locked position by pulling the slide mechanism toward you. 4 Relock shelf by pushing the slide mechanism away from you. 5 While holding shelf at a 45-degree angle with the gray handle facing you, push the shelf into the back of the hanger. 2 Lift the hanger directly upwards and pull toward you to remove it from the ladder. 6 Gently set the shelf onto the hanger once the back is secured by the hanger. 3 Place top hooks of the hanger into the desired slot, and lower straight down until lower hooks rest on the ladder. CAUTION Shelves must be removed prior to moving the refrigerator.