Electrolux EW27EW55PS Complete Owner's Guide (English) - Page 7
Types of Oven Racks, Luxury Glide™ Oven Racks
View all Electrolux EW27EW55PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Before Setting Oven Controls 7 Arranging, Removing, and Replacing Flat or Offset Oven Racks • To Arrange: Always arrange the oven racks when the oven is cool (prior to operating the oven). • To Remove: Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out. • To Replace: Place the oven rack on the rack guides on the oven walls. Tilt the front of the rack upward slightly and slide the oven rack back into place. Luxury Glide™ Oven Racks The fully extendable Luxury-Glide™ rack makes food preparation easier. This oven rack has glide tracks that allow the rack to be pulled away from the oven without rubbing the sides of the oven wall. Types of Oven Racks Flat Oven Rack Flat oven racks (or the flat handle oven rack) may be used for most cooking needs and may be placed in most oven rack positions. Figure 8: Luxury Glide™ rack showing glide stop To install the Luxury-Glide™ oven racks: Always use potholders or oven mitts when removing food or adjusting the oven racks. Wait until the oven in completely cooled if possible. Oven racks may be very hot and may cause burns. Figure 5: Flat oven rack Always remove/replace the oven racks before turning on the oven (when the oven is cool). The Luxury-Glide™ rack installs like all other oven racks. Before sliding the rack all the way in, lift the back of the rack slightly to set the rack past the stop position. Slide the rack all the way in so that the back of the rack stops by touching the vertical support of the ladder rack. The glide portion of the rack can be easily pulled in and out in this position while the rack's frame remains locked into the ladder supports. This allows bakeware to remain in place on the rack and slide out easily to check food items without removing them from the oven. Figure 6: Flat handle oven rack Offset Oven Rack (Some Models) The offset oven rack provides additional stepdown positions from the standard flat rack design. The offset design positions the base of the rack about 1/2 of a rack position lower than the flat rack and may be used in most oven rack positions. When setting the rack in, the glide stop must be behind the rack support in order for the rack to be properly installed Figure 9: Luxury Glide™ rack install Figure 7: Offset oven rack IMPORTANT! Remove all oven racks before starting a selfclean cycle. If oven racks are left inside the oven during a cleaning cycle, the slide ability of the Luxury-Glide™ oven racks may be damaged and all of the oven racks will lose their shiny finish. IMPORTANT! To prevent possible damage to the oven, do not attempt to close the oven door until all the oven racks are fully positioned back inside the oven cavity. Clean oven racks according to the instructions provided in the Care & Cleaning section.