Electrolux EW28BS87SS Complete Owner s Guide English - Page 19

Important

Page 19 highlights

Controls - Dispenser Models 19 IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Setting cooling temperatures 1 Touch the glass panel to illuminate the 2nd level of display. 2 Select the options icon. Plus (+) and minus (-) indicators will appear on either side of the displayed temperatures. 3 Press the + or - indicator to adjust the temperature to the desired temperature settings. The temperature setting display will begin to blink with the first touch. After five seconds of inactivity, the display will beep to accept the new temperature. After 10 seconds, the display times out and returns to the basic display. Alarms Door Ajar High Temp NOTE The recommended settings for a product installed in a kitchen is 37˚F for the fresh food compartment and 0˚F for the freezer. Power Fail IMPORTANT If your product has food freezing in the fresh food compartment, increase the temperature setting 1 or 2 degrees. IMPORTANT If you place food within 1 inch in front of the air ports, there may be the chance of freezing food. If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the center of the display. The alarm is turned off by closing the door. The alarm off key will blink to prompt the reset of any pending alarms. Press this key to reset any system alarms. In the event of a high temperature condition, the temperature display will blink and display HI. After 20 minutes, the high temp alert will be displayed and the alarm off icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. All other modes are turned off until the alarm is acknowledged. In the event of a power failure, the power fail alert will be displayed and the alarm off key will blink until the alarm off icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is turned off, the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached. Air Port

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

19
Controls - Dispenser Models
Setting cooling temperatures
1
Touch
the glass
panel to
illuminate
the 2nd
level of
display.
2
Select the
options
icon. Plus
(+) and
minus (-)
indicators will appear on either side of
the displayed temperatures.
3
Press the + or – indicator to adjust
the temperature to the desired
temperature settings.
The temperature setting display will
begin to blink with the first touch. After
five seconds of inactivity, the display will
beep to accept the new temperature.
After 10 seconds, the display times out
and returns to the basic display.
IMPORTANT
Pressing the system on/off icon does not
turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Alarms
Door Ajar
If the door has been left open for
an extended period of time, an
alarm will sound and the door ajar
indicator will display on the center of
the display. The alarm is turned off
by closing the door. The alarm off
key will blink to prompt the reset of
any pending alarms. Press this key
to reset any system alarms.
High Temp
In the event of a high temperature
condition, the temperature display
will blink and display HI. After 20
minutes, the high temp alert will
be displayed and the alarm off
icon will illuminate until pressed,
acknowledging the alarm, at which
time the highest temperature
reached will be displayed and the
refrigerator will resume normal op-
eration. All other modes are turned
off until the alarm is acknowledged.
Power Fail
In the event of a power failure, the
power fail alert will be displayed
and the alarm off key will blink
until the alarm off icon is pressed,
acknowledging the alarm. Other
modes may be turned off until the
alarm is acknowledged. When the
power fail alert is turned off, the
refrigerator will resume normal
operation. The high temp alarm
may also be illuminated until a safe
operating range temperature has
been reached.
NOTE
The recommended settings for a product
installed in a kitchen is 37˚F for the fresh
food compartment and 0˚F for the freezer.
IMPORTANT
If your product has food freezing in the
fresh food compartment, increase the
temperature setting 1 or 2 degrees.
IMPORTANT
If you place food within 1 inch in front of
the air ports, there may be the chance
of freezing food.
Air Port