Electrolux EW28BS87SS Complete Owner s Guide English - Page 9
Reposition the Air Seal, select models
View all Electrolux EW28BS87SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation 9 4 Gently set the shelf onto the hanger once the back is secured by the hanger. Reposition the Air Seal (select models) 1 Remove air seal by pushing seal straight back. 2 Position the air seal towards the outside edge of the shelf to avoid the air tower when shelf is pushed back into place. 3 Install seal by sliding the open channel end of the seal onto back edge of shelf until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. 5 Remove shelf from its locked position by pulling the slide mechanism toward you. Air Seal Air Seal 6 Lift the hanger directly upwards and pull toward you to remove it from the ladder.
9
4
Gently set the shelf onto the hanger
once the back is secured by the hanger.
Installation
5
Remove shelf from its locked position
by pulling the slide mechanism
toward you.
6
Lift the hanger directly upwards and
pull toward you to remove it from the
ladder.
Reposition the Air Seal
(select models)
1
Remove air seal by pushing seal
straight back.
2
Position the air seal towards the outside
edge of the shelf to avoid the air tower
when shelf is pushed back into place.
3
Install seal by sliding the open
channel end of the seal onto back
edge of shelf until seal sits snug on
back of shelf and flap sits at about a
10 degree angle from shelf surface.
Air Seal
Air Seal