Electrolux EW30GC60IS Installation Instructions (All Languages) - Page 8
Check Operation, Model and Serial Number Location - parts
UPC - 057112103624
View all Electrolux EW30GC60IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GAS COOKTOP INSTALLATION INSTRUCTIONS (For 30" & 36" Models) Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Disconnect electrical supply cord from wall receptacle before servicing cooktop. Preferred Method Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power supply cord with 3prong grounding plug. Figure 9 Model and Serial Number Location The serial plate is located on the underside of the cooktop (see Figure 10). When ordering parts for or making inquires about your range, always be sure to include the model and serial numbers and a lot number or letter from the serial plate of your cooktop. Your serial plate also tells you the rating of the burners, the type of fuel and the pressure the cooktop was adjusted for when it left the factory. Check Operation Refer to the Use and Care Guide packaged with the cooktop for operating instructions and for care and cleaning of your cooktop. Do not touch the burners. They may be hot enough to cause burns. 1. Install Burner Caps and Triple burner head This cooktop is equipped with sealed burners. A. Unpack the burner grates. B. Regular Burners: Burner heads and burner caps are already on the surface. Remove all tapes from burner caps and verify if they are correctly place on the burner heads. C. Triple Burner (if equipped): Remove all tapes from burner cap. Remove the burner cap and head. Remove and discard the packaging material. Replace head and cap on the triple burner. Be careful not to damage the electrode while placing the head over the orifice. Make sure electrode fits correctly into slot in burner head (see Figure 11). D. Be sure that all the burner caps and the triple burner head are correctly placed BEFORE using your cooktop. Burner Cap Burner Head Serial plate is located under the burner box. Figure 10 Figure 11 NOTE: There are no burner adjustments necessary on this cooktop. 8