Electrolux EW30GS65GW Use and Care Manual - Page 10
Oven Rack Supports & Oven Vents
UPC - 057112096964
View all Electrolux EW30GS65GW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 Feature Overview OVEN RACK SUPPORTS & OVEN VENTS Installing Oven Rack Supports ALWAYS INSTALL OVEN RACK SUPPORT BEFORE TURNING ON THE OVEN (WHEN THE OVEN IS COOL). To install oven rack support, insert the supports by pushing them downward into the two brackets on each side of the oven interior, as shown below. To remove the oven rack support for a self-clean cycle, pull up the support to disengage them from the brackets. If the rack supports are not removed, the self-clean cycle won't start. Oven Rack Positions This oven is equipped with ladder rack supports with 7 positions to accomodate precisely every mode of cooking. Rack positions 7 6 5 4 3 2 1 (NON-SLIDING RACK ONLY) Oven Vent Location The oven is vented above each door. When the oven is on, warm air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results. Oven Vent Warm Air