Electrolux EW30GS65GW Use and Care Manual - Page 16
Surface Cooking
UPC - 057112096964
View all Electrolux EW30GS65GW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Surface Cooking LOCATIONS OF THE BURNERS The cooktop is equipped with different sized burners. The surface burners are located on the cooktop as follows (See Figure): - a 5 000 BTU (natural gas) burner located at the right rear position; - a 18 000 BTU (natural gas) burner located at the right front position; - a 9 500 BTU (natural gas) burner located at the left front position; - a 14 000 BTU (natural gas) burner located at the left rear position. PLACEMENT OF BURNER HEADS AND CAPS Burner Head For the 18 000 BTU burner : Place the burner head over the gas orifice (Figure 1). Be careful not to damage the electrode while placing the burner head over the orifice. Make sure electrode fits correctly into slot in burner head. Gas Opening Figure 1 Burner Cap Burner Head Figure 2 For all burners : Place a burner cap on each burner head (see Figure 2), matching the cap size to the head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed BEFORE using your appliance. Make sure each burner cap is properly aligned and level. Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself. PROPER BURNER ADJUSTMENTS The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharply defined. Adjust or clean burner if flame is yellow-orange. To clean burner, see instructions under General Care & Cleaning.