Electrolux EW30WD55QS Installation Instructions (All Languages) - Page 1
Electrolux EW30WD55QS Manual
View all Electrolux EW30WD55QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS Canada INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. WARNING FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. United States GENERAL INFORMATION: The Warm & Serve Drawer IMPORTANT: The warmer drawer must be installed on can be used as a stand alone appliance or combine with a a leveled surface from left to right, rear to front and the built-in oven mounted above. surface must be capable of supporting 100 lbs (45,4 Kg). Warm & Serve Drawer Dimensions NOTE: A 60" (152,4 cm) long cable is supplied with IMPORTANT: The Warm & Serve Drawer runs off a the Warm & Serve Drawer. single phase three-wire 120 volt, 60 hertz, AC only Stand Alone Installation electrical supply with ground. Combination Warm & Serve Drawer/ 27" (68,6 cm) or C 60" (152,4 cm) Cord 30" (76,2 cm) Built-in Oven Installation Caution: Two 3" (7,6 cm) wide X 3/4" (1,9 cm) thick planks have to be install and they should be able to support 200 pounds. (90,7 Kg) Bottom of oven cutout B F Warm and Serve Drawer A Warm and Serve Cutout D E Minimum distance to floor 4½" (11,4 cm) FLOOR H* = 11 7/8" (30,2 cm) Min. is a Critical dimension and has to be respected. J** = 3" (7,6 cm) Max. Electrical Junction Box for wall oven must be lower than warmer drawer cutout. 27" Models 30" Models A. HEIGHT 11 ¼" (28,6 cm) 11 ¼" (28,6 cm) B. WIDTH 27" (68,6 cm) 30" (76,2 cm) C. Depth 23 3/8" (59,4 cm) 23 3/8" (59,4 cm) 27" Models - Min. Max. 30" Models - Min. Max. D. cutout height 9 7/8" (25,1 cm) 10 ¼" (26 cm) 9 7/8" (25,1 cm) 10 ¼" (26 cm) E. cutout width 25 ½" (64,8 cm) 25 ¾" (65,4 cm) 28 ½" (72,4 cm) 28 ¾" (73 cm) F. cutout depth 23 5/8" (60 cm) 24" (61 cm) 23 5/8" (60 cm) 24" (61 cm) A. HEIGHT 27" Models 11 ¼" (28,6 cm) 30" Models 11 ¼" (28,6 cm) B. WIDTH 27" (68,6 cm) 30" (76,2 cm) C. Depth 23 3/8" (59,4 cm) 23 3/8" (59,4 cm) D. cutout height E. cutout width F. cutout G. HEIGHT depth 27" - Min. 9 7/8" (25,1 cm) 25 ½" (64,8 cm) 23 5/8" (60 cm) 2" (5,1 cm) Max. 10 ¼" (26 cm) 25 ¾" (65,4 cm) 24" (61 cm) Depends on critical dimension H 30" - Min. 9 7/8" (25,1 cm) 28 ½" (72,4 cm) 23 5/8" (60 cm) 2" (5,1 cm) Max. 10 ¼" (26 cm) 28 ¾" (73 cm) 24" (61 cm) Depends on critical dimension H Printed in the USA P/N 318201809 (0901) Rev. D English - pages 1-3; Español - páginas 4-6 Français - pages 7-9; Notes - pages 10-12 1