Electrolux EWMED7CJIW Complete Owner's Guide (English) - Page 12

12 Operating Instructions Cycle Settings DRYING TEMPERATURE The appropriate drying temperature will automatically be indicated for the cycle selected. For best results Follow the fabric care label instructions on items to be dried. To change the preset temperature, press the temperature button to scroll to the desired setting. To protect your fabrics, not all temperatures are available with every cycle. If a temperature is not appropriate for the cycle, it cannot be selected and will not be lit by pressing the temperature button. The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future. NOTE To change the Temperature once the cycle has begun, press the pause button, make the new selection and press start again. SANITIZE Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired. NOTE Only sanitizing cycles have been designed to meet the requirements of NSF P154 protocol for sanitization efficacy. This option will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage. HIGH Recommended for most cotton fabrics. NORMAL Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads. LOW Recommended for delicate fabrics. AIR DRY This setting (no heat) should only be used with a time dry cycle to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies. DRYNESS LEVEL (AUTO DRY) The appropriate dryness level will automatically be indicated when the cycle is selected. To change the preset level, press the dryness button to scroll to the degree of dryness desired. To protect your fabrics, not all dryness levels are available with every cycle. If a dryness level is not appropriate for the cycle, it cannot be selected and will not be lit by pressing the dryness button. The dryness level selected for the cycle will be remembered and recalled each time that cycle is selected in the future. NSF Protocol P154 Sanitization Performance of Residential Clothes Dryers NOTE To change the dryness level once the cycle has begun, press the pause button, make the new selection and press start again. Select the normal dryness level for most Auto Dry cycles. Occasionally a load may seem too damp or overdried at the end of the cycle. To increase drying time for similar loads in the future, select max. For loads requiring less drying time, select less. Select damp for items you wish to partially dry before hanging or ironing.