Electrolux EWMED7CJIW Complete Owner's Guide (English) - Page 13

Operating Instructions 13 Cycle Options Suitable options will automatically be indicated when the cycle is selected. To add options, press the corresponding options buttons to illuminate the selections desired. To delete options, press the options buttons again and the indicator lights will turn off. To protect your fabrics, not all options are available with every cycle. If an option is not appropriate for the cycle, it will not be displayed. Occasionally, two options in the same cycle will conflict with each other, like line dry and anti static. When this happens, the option selected first will cause the conflicting option to not be selectable. NOTE To change the options once the cycle has begun, press the pause button, make the new selections and press start again. All options selected for the cycle, except sanitize and add steam, will be remembered and recalled each time that cycle is selected in the future. To prevent unintentional and accidental exposure of delicate material to sanitize heat or unexpected steam, the sanitize option and the add steam option will not be remembered and must be reselected each time. NOTE The sanitize and add steam options will be retained and recalled if either is selected and saved in the my favorite cycle. EXTENDED TUMBLE Select the extended tumble option if the dried load might not be removed promptly at the end of the cycle. The dry load will tumble continuously without heat for 30 minutes. EXT. TUMBLE will be displayed and a chime will sound periodically to remind you to remove the dried load. LIGHT (press & hold) The drum light will come on whenever the door is opened to illuminate the drum during loading and unloading. Closing the door turns off the light. The drum light will automatically turn off if the door is left open more than 3 minutes. You can activate the drum light during a cycle by pressing and holding the extended tumble button. The light will stay on during the cycle for 3 minutes. To turn it off, press and hold the button again. DELAY START Press delay start to select a drying time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you select start. NOTE While counting down during delay start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness. CHIME (press & hold) A signal will sound at the end of the cycle (and periodically during extended tumble) if this option is selected. ADD STEAM The add steam option injects steam into the clothing prior to cool down to reduce wrinkling, ironing and static cling. ANTI STATIC (press & hold) The anti static option injects steam into the clothing just before cycle completion to reduce static. LINE DRY Select this option to simulate hanging your laundry in a summer breeze combined with the wrinklereleasing benefits of tumble action. Since drying times are calculated with the dryer's automatic moisture sensors and heat is radically reduced or eliminated, cycle time will be lengthened. As a result, depending on moisture content of load, overall energy consumption decreases. SHRINK GUARD Select shrink guard to lower the initial drying temperature to protect fabrics from overdrying. CONTROL LOCK To lock the controls between cycles, press and hold the control lock button for 5 seconds. Repeat to unlock the controls when you are ready to operate the dryer. Use this feature to reduce the likelihood of accidental operation by children. ECO FRIENDLY The eco friendly option reduces the drying temperature a few degrees to save energy. In conjunction with automatic moisture sensors, cycle times will increase slightly, but overall energy usage will decrease.