Emerson CR519BE- Owners Manual - Page 9
upper hinge bracket. Replace the hinge cover and the right side screw cover.
 |
View all Emerson CR519BE- manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 4 BOTTOM VIEW Install the leveling foot and the bottom hinge bracket on the new bottom side. Then tighten the screws of the bottom hinge bracket. Slot in the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new side and check the fitting between the door/ hinge moving smoothly. Then tighten the screws of upper hinge bracket. Replace the hinge cover and the right side screw cover. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the upper hinge. Re-adjust the leveling feet.
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
4
3
BOTTOM
VIEW
Install the leveling foot and the bottom hinge bracket on the new bottom side. Then tighten the
screws of the bottom hinge bracket.
Slot in the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new
side and check the
fitting
between the door/ hinge moving smoothly. Then tighten the screws of
upper hinge bracket. Replace the hinge cover and the right side screw cover.
Check that the door is aligned horizontally and vertically and that the seals are closed on all
sides before
finally
tightening the upper hinge. Re-adjust the leveling feet.