Epic Fitness A35e Elliptical English Manual - Page 31
How To Use The Maintenance Mode
View all Epic Fitness A35e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
12. Enable or disable street view. During some workouts, the screen may show a map. To enable or disable the street view feature of the maps, first touch the Street View button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. The screen will show the progress of the update. When the update is complete, the elliptical will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. 13. Exit the equipment settings mode. 4. Calibrate the incline of the ramp. To exit the equipment settings mode, touch the back button on the screen. HOW TO USE THE MAINTENANCE MODE 1. Select the settings main menu. See step 1 on page 30. 2. Select the maintenance mode. In the settings main menu, touch the Maintenance button to enter the maintenance mode. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline of the ramp. The ramp will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline. Press the Cancel button to return to the maintenance mode. When the incline is calibrated, touch the Finish button. IMPORTANT: Keep pets, feet, and other objects away from the elliptical while the incline is calibrating. 5. View machine information. The maintenance mode main screen will show information about the console and the wireless network. Touch the Machine Info button to view information about your elliptical. After you view the information, touch the back button on the screen. 3. Update the console firmware. 6. Find keycodes. For the best results, regularly check for firmware updates. Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically. IMPORTANT: To avoid damaging the elliptical, do not turn off the power while the firmware is being updated. This option is intended to be used by service technicians to identify whether a certain button is working correctly. 7. Exit the maintenance mode. To exit the maintenance mode, press the back button on the console. 31