Epic Fitness A42t Sport Treadmill English Manual - Page 10
If You Do Not Connect The Con
View all Epic Fitness A42t Sport Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. Identify the left handrail assembly (C). Hold the handrail assembly near the Left Adjustable Upright (132). Insert the Upright Wire (92) through the opening on the bottom of the left handrail assembly. See the inset drawing. Press the left handrail assembly (C) onto the Left Adjustable Upright (132). Be careful not to pinch the Upright Wire (92). Make sure that the Upright Wire is resting in the slot at the top of the left Upright. Attach the left handrail assembly (C) to the Left Adjustable Upright (132) with two 3/8" x 3 1/4" Screws (2) and two 3/8" Star Washers (3). Attach the right handrail assembly (D) to the Right Adjustable Upright (133) in the same way. Note: There is no wire on the right side. 4 2 3 C 132 92 2 Slot 3 D 133 C 92 5. With the help of a second person, hold the console assembly (E) near the Upright (96). Connect the Upright Wire (92) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, connect the pulse wires (F). Make sure to connect the pulse wires on the right side (not shown) also. 5 Console Wire 92 Slot 132 E 92 F 96 10