Epic Fitness A42t Sport Treadmill English Manual - Page 11
Be careful not to, pinch any wires., See the inset drawing., Start all four Screws and then, tighten
View all Epic Fitness A42t Sport Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6. With the help of a second person, hold the console assembly (E) near the left handrail 6 assembly (C). Raise the console assembly enough to position the wires (F) so that they will not get pinched as you set the console assembly on the left handrail assembly. Be careful not to pinch any wires. See the inset drawing. Make sure that the console assembly (E) is flush against the handrail assemblies (C, D) in the locations shown by the arrows. Attach the console assembly (E) to the handrail assemblies (C, D) with four 5/16" x 3/4" Screws (1), four 5/16" Flat Washers (6), and four 3/8" External Star Washers (4) as shown (only one side is shown). Start all four Screws and then tighten them. 7. Identify the Left and Right Trays (107, 109). 7 Press the Left and Right Trays (107, 109) into the console assembly (E). E F C 4 6 1 D C E 107 109 E 11