Epic Fitness Tl 2200 Treadmill English Manual - Page 12

If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated #8 x 3/4" Screws (7) from 1 the Pulse Receiver Cover (95) on the back of the console assembly. 2. Next, hold the receiver so that the antenna is oriented as shown. Peel the paper backing off 2 the pad on the bottom of the receiver. Press the receiver onto the Receiver Cover (95) in the lo- cation shown. Console Assembly 95 7 Antenna Receiver 95 3. Connect the wire on the receiver to the wire extending from the console assembly. Make sure that no wires are pinched. Reattach the Pulse Receiver Cover (95) to the console assembly with the two #8 x 3/4" Screws (7). Discard the other wires included with the receiver. 3 Console Assembly Receiver Wires 95 7 12