Epic Fitness Tl 2200 Treadmill English Manual - Page 9

6. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Slide the three tabs on the Console Accent (102) into the console assembly. Press on the ends of the Console Accent (102) so that they snap into the slots in the console assembly. 6 Slot Tabs 102 Tab Console Assembly Slot 7. With the help of a second person, hold the console assembly near the handrail assembly. Connect the 25" Wire Harness (103) to the wire extending from the console assembly. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Connect the Console Ground Wires (96) to the two ground wires extending from the console assembly. Set the console assembly on the handrail assembly. Insert the pulse wire into the indicated hole. You will not connect the pulse wire to another wire unless you purchase the optional chest pulse sensor (see page 12). If necessary, move the wires so that the console assembly sits flat on the handrail assembly. Be careful not to pinch any wires. Note: If the console assembly does not sit flat on the handrail assembly, you will not be able to complete step 8. 7 Console Assembly Ground Wires Pulse Wire Handrail 96 Assembly Hole Wire 103 Wire 103 9