Epic Fitness View 550 Treadmill English Manual - Page 11

9. Orient the Storage Latch (78) so that the large barrel and the Latch Knob (77) are in the posi- 9 tions shown. Remove the tie from the upper end of the Storage Latch (78). Attach the upper end of the Storage Latch to the bracket on the Frame (61) with a 3/8" x 1 3/4" Bolt (5) and a 3/8" Nut (9). Remove the tie from the lower end of the Storage Latch (78). Keep the holes in the Latch Cap (79) aligned with the holes in the Storage Latch. Make sure to keep the Latch Cap inside the Storage Latch. Attach the Storage Latch to the bracket on the Base (115) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (9). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (61) (see HOW TO LOWER THE TREADMILL FOR USE on page 27). 61 9 77 5 78 Large Barrel 115 9 79 6 10. Note the location of the 75 ohm terminal and the audio/video input jack on the treadmill. For the 10 television to operate, an antenna or a CATV cable must be connected to the 75 ohm terminal or the 96" A/V Wire (101) must be connected to the audio/video input jack (see page 13). Audio/ Video Input Jack 75 Ohm Terminal 101 11. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 29 and 30). To protect the floor or carpet from damage, place a mat under the treadmill. 11