Epic Fitness View 550 Treadmill English Manual - Page 13

Before operating the television, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm terminal or the 96" A/V Wire to the audio/video input jack. No CATV cable, antenna, or adapter is included. HOW TO CONNECT AN ANTENNA Place an indoor antenna or an outdoor combination VHF/UHF antenna in the desired location. Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your outdoor antenna and the lead-in wiring before connecting the antenna. Indoor Antenna Outdoor Combination VHF/UHF Antenna 75 Ohm CATV Cable 1. Connect the 75 ohm CATV cable from the antenna to the 75 ohm terminal on the treadmill frame near the power cord. 75 Ohm CATV Cable 75 Ohm Terminal 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. Screwdriver 300 Ohm Flat Wire Note: Due to an FCC requirement, analog signals will no longer be broadcast over the air after June 12, 2009. If you wish to view television signals through an antenna after that date, you must have an antenna capable of receiving digital signals or a digital converter box. Cable television will not be affected. HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable. 1. Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source. 2. Plug in the power cord of your external source. See your external source userʼs manual for proper grounding instructions. 3. Connect the 75 ohm CATV cable to the 75 ohm terminal on the treadmill frame near the power cord. See the drawing at the left. HOW TO CONNECT AN EXTERNAL SOURCE USING THE 96" A/V WIRE Use the 96" A/V Wire to connect to an external source such as a VCR or DVD player. 1. Connect the threepronged end of the 96" A/V Wire to your external source. 96" AV Wire 300 to 75 Ohm Adapter 2. Connect the 300 ohm to 75 ohm adapter to the 75 ohm terminal on the treadmill frame near the power cord. 300 to 75 Ohm Adapter 75 Ohm Terminal 2. Plug in the power cord of your external source. See your external source userʼs manual for proper grounding instructions. 3. Connect the 96" A/V Wire to the audio/video input jack on the treadmill frame near the power cord. 13