Epson 15000 Product Information Guide - Page 7

EPSON GT-15000 3. Click OK. If you want to change the program after you set up the a Start button, open the Scanners and Cameras utility in the Windows Control Panel. Right-click your scanner and select Properties. Select the Events tab, then select the program you want to use. Cleaning the Scanner To keep your scanner operating at its best, clean it periodically. 1. Press the PPower button to turn the scanner off, and unplug the power cord. 2. Use a soft, damp cloth and mild detergent to clean the outer case. (Apply the liquid to the cloth, not directly on the scanner.) Caution: Don't let water get into the scanner. 3. Clean dust and smudges from the document table glass with a soft, dry cloth (a microfiber glass cleaning cloth is recommended). You can also use compressed-air dust remover sprays. Dust on the glass can cause white spots to appear in your scanned image. To remove grease, use pretreated lens/scanner wipes, or a small amount of glass cleaner on a soft cloth. Dry the document table glass afterwards. Cautions: Always unplug the scanner before cleaning. Never use a harsh or abrasive brush or cleaning product to clean the document table. A damaged glass surface can decrease the scanning quality. Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case. Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently damage them. Don't spray lubricants inside the scanner. Never open the scanner case. If you think repairs or adjustments are necessary, consult your dealer or contact EPSON. Unplug the scanner and refer servicing to qualified service personnel if the power cord or plug is damaged, if liquid has entered the scanner, if the scanner has been dropped or the case damaged, or if the scanner does not operate normally or exhibits a distinct change in performance. Transporting the Scanner Always secure the carriage when you transport the scanner a long distance or store it for an extended time. 1. If you're using the automatic document feeder, remove it from the scanner and replace the scanner cover. Warning: Make sure you have someone help you lift the automatic document feeder. 2. Turn on the scanner and wait until the carriage moves left to the home position. Then turn off the scanner. 3. Push down the transportation lock at the back of the scanner to the Lock position. Transportation lock 4. Use the scanner's original box, or a similar box with enough packaging material to prevent it from moving around in the box. 5. Pack the automatic document feeder in its original box, or use a similar box with enough packaging material to prevent any movement inside the box. Related Documentation CPD-17264 EPSON GT-15000 User's Guide EPSON GT-15000 Software Reference Guide (html) 12/03 EPSON GT-15000 - 7