Epson 1715C Quick Start - Page 1

PowerLite® 1705c/ 1 715c Quick Setup 1 Turn On Your Equipment 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Open the A/V Mute slide. Make sure the slide is opened completely. 3 Remove the battery cover on the remote control. Locate the two AAA batteries that came with the projector and insert them. Then replace the battery cover. 4 To turn the projector on, press the Power button on the projector or the remote control. The projector beeps once, and the projector's Power light flashes green and then stays on. Power button CAUTION: Before unplugging the projector... Shut the projector down properly: 1. Press the Power button twice. 2. When the orange light stops flashing and the projector beeps, you can unplug the projector. 2 Adjust the Image 1 To raise the image, press the blue foot release button for the front adjustable foot and lift the front. Release the button to lock the foot in position.