Epson 1715C Quick Start - Page 2

2 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Focus Zoom 3 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place it directly in front of the screen, facing the screen squarely. 4 If your image looks like or , press the or buttons on the projector to correct it. 3 C hoose a Presentation Method How do you want to get images to the projector? • To connect to a notebook, see "If connecting to a notebook" below. • To project over a wireless network, see "If projecting wirelessly" on the back of this sheet. Computer cable Y ou must have installed the projector's EasyMP™ software and configured your projector and computer before you can project wirelessly. See your User's Guide for instructions. • To give a presentation stored on a flash drive, digital camera, or other USB storage device, see Chapter 5 in your User's Guide. • To connect to your notebook using the included USB cable, see your User's Guide. If connecting to a notebook... 1 M ake sure you've turned on the projector and adjusted the image as described in sections 1 and 2. 2 Locate the computer cable that came with the projector. Connect one end to the projector's blue Computer (Component Video) port. Connect the other end to your notebook's video-out port or monitor port. 3 Press the Source Search button on the projector or the remote control until your computer image is displayed. Turn over