Epson 1815p Product Support Bulletin(s) - Page 41

EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 06/07/2007 Originator: TC PSB.2007.06.002 Authorization: TI 07-01e Rev. A Total Pages: 5 PowerLite 1705c / 1715c / 1815p Release of EasyMP Firmware V.1.10 for USB Display support under Windows Vista™ operating system. This bulletin was created to inform you about the release of PowerLite 1705c / 1715c / 1815p EasyMP firmware V.1.10 for the USB Display feature to work in Windows Vista. This bulletin also provides instructions on where to find the firmware upgrade files and how to perform the upgrade using a USB Thumbdrive. Description of Change: Main improvements and limitations by this upgrade are as follows: Software Version Applicable The improvements and limitations models USB Display V.1.10 PowerLite1705c / 1715c PowerLite 1815p [Improvements] • Support Windows Vista. • Add the function which shows ESSID and hides ESSID on the portal screen of EasyMP. • Support WEP shared Key Authentication. [Limitations] • There are unreadable fonts such as "2" in a user interface. • USB Display does not redraw the sent image until UAC (User Account Control) is shown on PC. • The displayed image is an image which is not with Windows Vista Aero. • When using Windows Media Center and Windows photo gallery with full screen, the USB Display feature cannot display the images of a full screen to a projector. How to download the needed files Please download the firmware file and update instructions from the Epson PowerLite 1705c or 1715c product support web sites at: http://support.epson.com You can download the EasyMP firmware after agreeing to the EPSON END USER LICENSE AGREEMENT. How to distinguish new version products from old version ones You can confirm the version number in the portal screen of EasyMP. Page 1 of 5 PSB.2007.06.002