Epson 2080 Product Information Guide - Page 2

EPSON LQ-2080 Optional Interface Cards You can install an optional interface card to supplement your printer's built-in parallel interface and provide added network compatibility. The EPSON interface cards in the table below are compatible with your printer. (Not all interfaces are available in all countries.) Model number C82305V / C82306V C82307V / C82308V C82310V / C82311V C82312V C82313V C82314V C82315V C82345V C82357V / C82362V / C82364V Name Serial interface card 32KB intelligent serial interface card 32KB intelligent parallel interface card LocalTalk interface card 32KB IEEE-488 interface card Coax interface card Twinax interface card IEEE-1284 parallel interface card Ethernet interface card The asterisk (V) is a substitute for the last digit, which varies by country. Printer Specifications Mechanical Printing method Printing speed Printing direction Line spacing Printable columns Resolution 24-pin impact dot matrix High-speed draft 400 cps at 10 cpi maximum Draft 300 cps at 10 cpi Letter-quality 100 cps at 10 cpi Bidirectional logic seeking for text and graphics printing. Unidirectional text or graphics printing can be selected using software commands. 1/6-inch or programmable in 1/360-inch increments 136 columns (at 10 cpi) Maximum 360 × 180 dpi (letter quality) 360 × 360 dpi (raster graphics) Interfaces One standard bidirectional, 8-bit, parallel interface with IEEE 1284 nibble mode support and one optional interface slot Paper feed methods Friction (front or top paper entry) Push tractor (front or rear paper entry) Pull tractor (optional-front, bottom, or rear paper entry) Push and pull tractor (optional) Cut-sheet feeder (optional) Roll paper holder (optional) Paper feed speed Continuous 5 inches/second Intermittent 45 ms/line at 1/6-inch line spacing Paper capacity High-capacity cut-sheet feeder up to 150 sheets of 22 lb (82 g/m2) paper up to 25 plain or bond envelopes up to 30 airmail envelopes up to 30 postcards a stack of multipart forms up to 0.59 inch (15 mm) thick Note: The thickness of the paper stack can be up to 0.59 inch (15 mm). Second-bin cut-sheet feeder up to 150 sheets of 22 lb (82 g/m2) paper Note: The thickness of the paper stack can be up to 0.20 inch (5 mm). Buffer 64KB or 0KB (selectable in the default-setting mode or the EPSON Remote! utility) 2 - EPSON LQ-2080 2/99