Epson 2165W Quick Setup - Page 1

PowerLite® 975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer USB cable HDMI cable Mobile media device Connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI1/MHL port. MHL cable Streaming device Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information. HDBaseT™ transmitter (PowerLite 2165W/2265U) Connect an HDBaseT transmitter to the HDBaseT port. Ethernet cable 3.5 mm stereo mini cable VGA cable Computer port Connect one end of a VGA cable to the projector's Computer1 or Computer2/Monitor Out port, and the other end to your laptop or computer's monitor port. Make sure to switch your laptop to external display (see "Troubleshooting" on the back of this sheet). You can also connect an audio cable. HDMI port Connect one end of an HDMI cable to the projector's HDMI1/MHL or HDMI2 ports and the other end to an HDMI port on your computer. USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer. Windows Vista® or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. OS X 10.7.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Video device Connect multiple video devices and use the Source Search button on the projector or the remote control to switch between them. Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting the network cable between them. Camera, USB device, or document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector's USB-A (flat) port. USB cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. You can also connect other Epson document cameras to the projector. See the online User's Guide for details. External monitor and external speakers You can also connect an external monitor and external speakers to your projector to enhance your presentations. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The On/Standby light on the projector turns blue. RCA video cable (composite video) HDMI cable RCA audio cable Component video to VGA cable 3 Open the A/V Mute slide all the way.