Epson 2180 User Manual - Page 191
with labels, Roll paper: rear entry with optional roll paper holder only
UPC - 010343815766
View all Epson 2180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Continuous paper (standard and multi-part): front, rear, and bottom entry Width 101.6 to 406.4 mm (4.0 to 16.0 inches) Length 101.6 to 558.8 mm (4.0 to 22.0 inches) Copies 1 original + up to 5 copies Thickness Printable area 0.065 to 0.46 mm (0.0025 to 0.018 inch) Perforated edges up to 0.9 mm (0.035 inch) C Weight (not multi-part) 52 to 82 g/m2 (14 to 22 lb) Weight (one sheet of multi-part) 40 to 58 g/m2 (12 to 15 lb) Binding Point glue or paper staples on both sides (front, bottom, or rear entry) Note: Because thick multi-part forms require a straight paper path, load them in the front slot. Continuous paper with labels: Label size front and bottom entry 23.8 × 63.5 mm (15/16 × 2.5 inches) minimum 2.5 mm (0.1 inch) corner radius, minimum Backing sheet width 101.6 to 406.4 mm (4.0 to 16.0 inches) Backing sheet length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches) Backing sheet thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch) Total thickness Label weight 0.16 to 0.19 mm (0.0063 to 0.0075 inch) 68 g/m2 (17 lb) Roll paper: rear entry with optional roll paper holder only Width 216 ± 3 mm (8.5 ± 0.12 inch) Thickness Weight 0.07 to 0.09 mm (0.0028 to 0.0035 inch) 52 to 82 g/m2 (14 to 22 lb) Specifications C-7