Epson 2180 User Manual - Page 50
Loading Multi-Part Forms, Loading Continuous Paper With Labels
UPC - 010343815766
View all Epson 2180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Loading Multi-Part Forms You can use carbonless multi-part forms of up to six parts (five copies in addition to the original). Make sure you set the paper thickness lever to the proper position based on the number of layers in your form. 2 For best results with thick paper such as multi-part forms, select a straight or almost straight paper path. It is best to load multipart forms using: t the front slot and the front push tractor t the front or bottom slot and the pull tractor Except for setting the paper thickness lever, you load multi-part forms the same way you load ordinary continuous paper. For details, see the sections on loading continuous paper later in this chapter. Note: t Be sure your multi-part forms do not exceed 0.46 mm (0.018 inch) in thickness for the printable area and up to 0.9 mm (0.035 inch) for the perforated edges. t Use multi-part forms only under normal temperature and humidity conditions, as follows: Temperature 15 to 25°C (59 to 77°F) Humidity 30 to 60% RH t Do not load paper that is damaged, curled or wrinkled. Loading Continuous Paper With Labels When printing on labels, use only the type of labels that are mounted on continuous backing sheets with sprocket holes for use with a tractor feeder. Do not try to print on single sheets with labels because the printer may not feed labels on a shiny backing sheet properly. Printing on Continuous Paper 2-5